0 100in Ejector Header

Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213-F

DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

Contact Now

160 Positions Straight type E Solder Male

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XXXX-504

Product introduction The connector conforms tot he DIN 41612 standard - DIN is the Deutsches Institut für Normung i.e. the German Institute for Standardisation. In view of the popularity of the connector and its worldwide usage, the standard has been adopted by other bodies and may be referred to as IEC 60603-2 and EN...

Contact Now

DIN41612 Type 0.33Q Connectors-Inversed 10 Positions

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DFR-XX-XXX-222

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

DIN 41612 / IEC 60603-2 Connectors Vertical Plug/Male Inverse/Inverted 20 Positions

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-217

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon

• Min. Order: 1000 Piece/Pieces
• Model No.: HPCNR-FXXXX

Product Catogory: Input/Output Connector丨SCSI Connector丨D-SUB Connector丨 IEE1394丨USB Interfaces丨 Modular Jack丨Edge Card Slot Connector丨Serial ATA Connector丨 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon/ PCB D-Sub Connectors Product specification 1. El ectri cal Characteristics: 1.1 Contact...

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

2.54mm Ejector/Latch Header Connectors 90° Double Layer

• Packaging: Tray, Bag, Tube U, Tube+CAP R,...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR02 -XXXXXXX

2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand...

Contact Now

2.54mm Ejector Header 90° w Metal Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR03-XXXXXX

Connector Catogory: Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to...

Contact Now

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

0.100" (2.54mm) Ejector Header Solder Angle Through Hole with Lever

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR05-XXXXXX

0.100" (2.54mm) Ejector Header Solder Angle Through Hole with Lever Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.00mm Female Header Single Row Straight

• Model No.: FHDS01-XXSXXX

2.0 female header single row straight Product Specification Product Name: 2.0mm (.079”) Female Header Single Row 180 degree 2.0mm 2p-40p Single Row 180 Degrees Straight 2 Way Female Header 180 Degree 2.0mm (.079”) female header connector 2.00mm PCB DIP Type Single Row Female Header 2.0mm (.079”) straight female header...

Contact Now