4 2mm Pitch

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm Pitch Vertical Through Hole Turned Pin IC Dip Socket Dual-in-line Socket Straight DIP(H=3.0)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: MIFES02-XXXX

DIL Sockets Overview DIL sockets (dual in-line sockets) are integrated circuit components used in almost all modern electronic devices. They have two parallel rows of pins set in a rectangular housing. The sockets have different numbers of pins to match the target integrated circuit. DIL sockets are embedded in a...

Contact Now

1.27mm(.050") Pitch Dual Row Box Header 180° H=4.90

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Supply Ability: 100000000pcs/month
• Min. Order: 100000000 Piece/Pieces
• Model No.: BHAS01-XXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

2.00mm(.079") Pitch Shrouded PCB Box Header through-hole/THT 90° H=6.40

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCR02-XXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

2.0x2.0mm (0.079x0.079in)Box Header SMT Vertical Single Rows H=4.8

• Packaging: Tape & Reel
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCM05-XXXXX

Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions of the box header...

Contact Now

2.00mm(.079") Pitch Shrouded Box Header DIP 180° type H=4.8 Add Housing

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCS05-XXXXX

Box headers or shrouded headers Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides....

Contact Now

2.54mm dual row box header Through Hold 180° type H=9.0 Add Housing

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS05-XXXXX

Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions of the box header...

Contact Now

2.54mm (0.1") 2 Rows Box Header Connector DIP Straight 180° H=9.9mm

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS08-XXXXX

Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions of the box header...

Contact Now

2.54mm(.100") Pitch Dual Row Box/Shrouded Headers DIP 90° type H=9.0

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDR01-XXXXX

Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

Contact Now

2.54mm dual row box header DIP Right Angel 90° type H=13.60mm

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDR02-XXXXX

The simple box header is generally composed of a square plastic socket and a number of square pins arranged in neat rows. What distinguishes the simple box header from the ordinary box header is that the clips on both sides originally used for fixing, namely the "horn", are removed. The fixed function is lost....

Contact Now

2.54mm (0.1") dual row Pin (Male) Box Header SMT with Post

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDM04-XXXXX

• The simple box header consists of square plastic socket and square needles arranged orderly. The difference • between the connector and the simple box header is that the simple box header will remove the snapshot packets on both sides. • According to the requirements, the peripheral dimensions of small connectors...

Contact Now

2.54mm(0.100") x2.54mm Pitch Ejector Header 180° metal latch

• Packaging: tray
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDS02-XXXXXX

Product Overview: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector Header...

Contact Now