Ejector Header Dip

1.27*2.54mm Dual Row Latch/Ejector Header DIP 180° type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBS01-XXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

2.00mm Pitch Dual Row Ejector Header DIP 180°

• Min. Order: 1 Piece/Pieces
• Model No.: LHCS01-XXXXXX

Structure • Simple ejector header usually consists of four square plastic sockets and several neatly arranged guidelines. The difference between a box header and an ejector header is that the box header removes the buttons on both sides. • As required, there are generally three specifications of box header: 1.27...

Contact Now

2.54mm(0.100") Pitch Ejector Head DIP 180° with special short latch

• Packaging: tray
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDS03-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Ejector Head DIP 180° with special short latch SPECIFICATION Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V...

Contact Now

2.54mm (.100") Pitch Dual Row Ejector Header Throught Hole 180° w Plastic Latch

• Model No.: LHDS05-XXXXX

How to install the ejector header? Ejector header is widely used in electronic field. Therefore, most equipment assembly personnel will face the problem of how to install the horn connector. In fact, we only need to grasp three points. 1 Insertion direction When the horn connector is fully inserted to U=14.2, it shall...

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

1.27mm(.050") Pitch Dual Latch Ejector Header 90° DIP type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHAR01-XXXXX

Product Overview: Ejector headers are usually made of head shaped plastic and square needles similar to animal cattle. The difference of the ejector connector is that the simple ejector has more clips on both sides. According to the requirements, the external dimensions of the ejector connector commonly include 1.27...

Contact Now

1.27mm(.050") Dual Row Shrouded Header With Ejector Straight DIP Type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHAS01-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

1.27*2.54mm 2 Rows Male/Pin Ejector Header Connector DIP/THT 90° Right Angle

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

1.27*2.54mm Male Ejector Header Connector DIP Straight /180 Degree

• Min. Order: 1 Piece/Pieces
• Model No.: LHBS02-XXXXX

Product Description Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 1.27*2.54mm rstraight type Ejector Header Connector SPECIFICATION Current Rating: 1.0Amp Insulation Resistance:1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating...

Contact Now

2.54*2.54mm(0.100") 2 Rows Male Ejector Header Connector DIP 180°

• Model No.: LHDS01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

2.54mm (.100") Pitch Ejector Header Dual Row Straight DIP with lever

• Model No.: LHDS04-XXXXXXX

Box header/ ejector header connector, With stright, SMT,Right angle, 2.54pitch, 2.0pitch, 1.27pitch, The commonly used Pin ways have 6P,8P,10P,14P,16P,20P, 24P,26P,30P,34P, 40P,50P,64P. Box header/ ejector header and IDC flat cable connectors are two of the most commonly used connectors. Box headers can be found in...

Contact Now