Ic Socket Dip Straight

1.778mm Dual-in-line IC Socket Connector Straight DIP Type Stamped

• Min. Order: 1000 Piece/Pieces
• Model No.: IFHS01-XXXX

Connector Category:IC SOCKET & Machined SOCKET丨Machined Pin Header丨 Machined Female Header丨 IC SOCKET丨Pin Grid Array Sockets丨丨PLCC SOCKET丨 1.778mm Dual-in-line Socket Straight DIP Type Electric Connector Product specification Current Rating: 1.0A Max Contact Resistance: 20 milliohms MAX Dielectric Withstanding...

Contact Now

2.54mm Pitch Vertical Through Hole Turned Pin IC Dip Socket Dual-in-line Socket Straight DIP(H=3.0)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: MIFES02-XXXX

DIL Sockets Overview DIL sockets (dual in-line sockets) are integrated circuit components used in almost all modern electronic devices. They have two parallel rows of pins set in a rectangular housing. The sockets have different numbers of pins to match the target integrated circuit. DIL sockets are embedded in a...

Contact Now

2.54mm Dual-in-line Integrated Circuit (IC) Sockets Connector Straight DIP(H=3 L=7.4)

• Model No.: MIFES03-XXXX

Connector Category:IC SOCKET & Machined SOCKET丨Machined Pin Header丨 Machined Female Header丨 IC SOCKET丨Pin Grid Array Sockets丨丨PLCC SOCKET丨 2.54mm Dual-in-line Socket Straight DIP(H=3 L=7.4) The function of the IC socket is to facilitate the insertion of the IC card. A multi pin integrated circuit is called an IC....

Contact Now

1.27*2.54mm THT Straight/Vertical Box Header 180° H=5.90

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHBS02-XXXXX

Box/Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

2.0x2.0mm Shrouded Box Header Vertical /Straight SMT Type H=6.1mm

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCM04-XXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

0.100" (2.54 mm) Dual Row Shrouded Box Header DIP 180° type H=9.40mm

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS04-XXXXX

Box headers or shrouded headers are pin headers that feature a plastic guide box or shroud surrounding the pins. This plastic box helps to prevent damage to the pins when it has yet to be mated and provides for an easier mating process of the connectors. Box headers are offered with keying and polarized features that...

Contact Now

1.27*2.54mm Dual Row Latch/Ejector Header DIP 180° type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBS01-XXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

2.54mm (.100") Pitch Dual Row Ejector Header Throught Hole 180° w Plastic Latch

• Model No.: LHDS05-XXXXX

How to install the ejector header? Ejector header is widely used in electronic field. Therefore, most equipment assembly personnel will face the problem of how to install the horn connector. In fact, we only need to grasp three points. 1 Insertion direction When the horn connector is fully inserted to U=14.2, it shall...

Contact Now

2.54mm(.100") Ejector Header SMT Straight/Vertical With Plastic Latch

• Packaging: TRAY/BAG/TUBE/REEL
• Min. Order: 500 Piece/Pieces
• Model No.: LHDM05-XXXXX X

Product Overview: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector Header...

Contact Now

0.8mm Pin Header Connector DIP Straight Dual Row Double Plastic

• Model No.: PHAS02-XXD-ACB-XX

0.8 mm Pin Header Dual Row Double Plastic Straight Type PHAS02-XXD SPECIFICATIONS: Product Name 0.80mm(0.0315") Pitch Pin Header DIP Straight 2 Row 2 Plastic 0.8mm Pitch Pin Header 180°DIP/Through Hole Dual Row Double Plastic Connector Part#: PHAS02-XXD-ACB-XX Product Category: Board to Board Connectors丨PC Board...

Contact Now

1.00mm (0.039in) Pin Header Single Row Straight Double Plastic

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHBS02-XXS-ACB-XXX

Pin Header Connector Introduction What is a pin header? A pin header, or header, is a male connector with one or two rows of metal pins attached to a plastic base. Pin headers with more than two rows are available from some manufacturers. The pins are spaced in uniform intervals (commonly 2.54 mm or 0.1 inch apart)...

Contact Now

1.00mm (0.039") Pitch asymmetric double plastic SMT Straight Pin Header PCB Connectors

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHBM04-11G0D116BB25

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now