Short Latch Ejector Header

2.54mm Ejector Header SMT 180° With Special Short Latch

• Packaging: Tray/Bag/Tube/Reel
• Min. Order: 500 Piece/Pieces
• Model No.: LHDM03-XXXXX

Product Introduction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm Ejector/Latch Header Connectors 90° Double Layer

• Packaging: Tray, Bag, Tube U, Tube+CAP R,...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR02 -XXXXXXX

2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand...

Contact Now

2.54mm Ejector Header 90° w Metal Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR03-XXXXXX

Connector Catogory: Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to...

Contact Now

0.100" (2.54mm) Ejector Header Solder Angle Through Hole with Lever

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR05-XXXXXX

0.100" (2.54mm) Ejector Header Solder Angle Through Hole with Lever Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

Dual Row 1.27mm(.050") Latch Ejector Header SMT 180°

• Packaging: tape & reel packaging
• Min. Order: 1000 Piece/Pieces
• Model No.: LHAM01-XXXXX

What is an Ejector header? Cow horn connector is one of many connector types. It is not only a European connector, but also a variety of connectors classified according to actual use conditions. It is called a cow horn connector because its shape is similar to the cow horn. The cow horn connector is a very simple...

Contact Now

1.27mm(.050") Pitch Dual Latch Ejector Header 90° DIP type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHAR01-XXXXX

Product Overview: Ejector headers are usually made of head shaped plastic and square needles similar to animal cattle. The difference of the ejector connector is that the simple ejector has more clips on both sides. According to the requirements, the external dimensions of the ejector connector commonly include 1.27...

Contact Now

1.27*2.54mm ejector header 90° type four row foot

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR02-XXXXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 1.27*2.54mm ejector header 90° type four row foot SPECIFICATION Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to...

Contact Now

1.27*2.54mm Dual Row Latch/Ejector Header DIP 180° type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBS01-XXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

2.0 x 2.0mm Dual Row Latch/Ejector Header SMT 180°

• Packaging: tray
• Min. Order: 1000 Piece/Pieces
• Model No.: LHCM01-XXXXXX

How to install the ejector header? Ejector header is widely used in electronic field. Therefore, most equipment assembly personnel will face the problem of how to install the ejector header. In fact, we only need to grasp three points. 1 Insertion direction. When the ejector header is fully inserted to U=14.2, it...

Contact Now

2.54mm(0.100") x2.54mm Pitch Ejector Header 180° metal latch

• Packaging: tray
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDS02-XXXXXX

Product Overview: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector Header...

Contact Now