Solder Pin Din 41612 Connectors

160 Postions Vertcal Solder Type E Female DIN 41612 / IEC 60603-2 Connector

• Brand: ATKCONN
• Packaging: Tray
• Supply Ability: 1000000/Month
• Min. Order: 3000 Piece/Pieces

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

160 Way Vertcal Solder Type E Receptacle DIN 41612 / IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DFS-XX-XXX-501

DIN41612 Vertcal Solder Penta Row Type E Female 160 Pins Product introduction The DIN41612 connector is classified according to the standard of the connector. There are two different IEC standards that can be used, namely IEC 60-603 and IEC 61 076-4 113. Each provides slightly different test conditions, but in both...

Contact Now

150 Pin Plug Type C DIN41612 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-306

DIN 41612 Right Angle Plug Type C Connectors 150 Positions Product introduction There are several different types of DIN 41612 connector that are referred to within the data sheets. These include Types B, C, D, F, M, Q and R. There are also the standard DIN sizes as well as half, third, and expanded sizes to meet all...

Contact Now

160P Right Angle Solder Type E Plug DIN41612 DIN 41612 / IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-502

Product introduction The positioning accuracy can ensure that the connector is accurately connected when the circuit board is loaded into the chassis; the installation firmness is used to ensure that the connector does not fall off or shift when the circuit board is pulled out and inserted; the replaceability is used...

Contact Now

DIN 41612 / IEC 60603-2 Connectors Extended Type R Solder Type 120P

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-309

Product introduction The positioning accuracy can ensure that the connector is accurately connected when the circuit board is loaded into the chassis; the installation firmness is used to ensure that the connector does not fall off or shift when the circuit board is unplugged and inserted, so as to ensure the...

Contact Now

160P R/A Type E Solder Plug DIN41612 Connectors

• Brand: ATKCONN
• Packaging: Tray
• Supply Ability: 1000000/Month
• Min. Order: 3000 Piece/Pieces

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

20 Positions Vertical Female Eurocard Connectors per DIN 41612 and IEC 60603-2

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DFS-XX-XXX-215

Eurocard Connectors per DIN 41612 and IEC 60603-2 Product introduction Din41612 mainly have parallel connection and vertical connection. There are 2A, 6A, 15A, etc., signal type, power type and mixed type of different media, the product has a wide range of applications The rubber core is composed of high-performance...

Contact Now

48 Positions Vertical Female Type B DIN 41612 / IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DFS-XX-XXX-217

DIN41612 Vertical Female Type B Connectors 48 Positions Product introduction Din41612 connectors are generally used for signal or power connection below 3MHZ, not suitable for signal connection above 10MHZ; when used for 3~10MHZ signal connection, isolation method is required, and ground pins are inserted between each...

Contact Now

10pin Right Angle Plug DIN41612 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XXXX-210

DIN 41612/IEC 60603-2 Electronics Connectors/Backplane Connectors Product introduction There are 2A, 6A, 15A, etc., signal type, power type and mixed type of different media, the product has a wide range of applications. There are four installation forms of backplane, parallel board, common panel, and wire-to-board,...

Contact Now

16 Pin Right Angle Male/Plug DIN41612 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XXXX-211

DIN 41612, DIN41612, Backplane Connectors, IEC 60603.2, IEC 60603-2, and EN60603-2 Product introduction Din41612 connectors are generally used for signal or power connection below 3MHZ, not suitable for signal connection above 10MHZ. when the working temperature is 25°C, it is recommended that the current allocated to...

Contact Now

32 Pin DIN41612 Right Angle Plug Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-207

DIN 41612/IEC 60603-2 Eurocard Connector Overview DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. Uses The...

Contact Now

20 Pin Right Angle Plug DIN 41612 / IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213

DIN 41612, IEC 60603-2 Connectors Overview DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612, IEC...

Contact Now